Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper of a Renault Scenic

Model: Renault Scenic MK III, Scenic III, Scenic 3, MK 3 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Rear bumper

See other generations:
Video tutorial

How to remove the rear bumper of a Renault Scenic? Let’s go through the steps, which are not too complex if done in order: first, using a screwdriver or battery-powered drill, unscrew the securing pins located at the back of the lights (after removing the inspection caps), and remove them after disconnecting the terminals.

Unscrew the screws located at the bottom of the bumper, then remove the screws located at the sides of the wheel arch liners.

Once the bumper is free from any screws or pins, grip it with your hands and pull it away from the bodywork (disconnect any power cables if necessary).


Updated on 1 March 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper of the Renault Scenic
How to Remove the Rear Bumper of the Renault Scenic
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) Today's instructions will show you the procedure for removing and replacing the rear bumper of the Renault Scenic. First, open the boot and start uns…
How to Remove the Front Bumper of the Renault Scenic
How to Remove the Front Bumper of the Renault Scenic
Renault Scenic (2003-2009 / Scenic 2, MK 2) In today's instructions, you will learn how to remove and replace the front bumper of the Renault Scenic in simple steps. First, open the vehicle's b…
How to Remove the Rear Bumper of a Renault Scenic III
How to Remove the Rear Bumper of a Renault Scenic III
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) To remove the rear bumper of a Renault Scenic III, start by opening the tailgate: at the bottom (between the tailgate and the boot), you will find a …

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos