Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the door panel of the Renault Kadjar?

Model: Renault Kadjar MK 1 - Years 2015-2022
Part: Door trim panel

In order to remove the door panel of the Renault Kadjar, you will need to use an object to pry off the panel covering the inner handle. Then, you can proceed by removing the window control panel and disconnecting the underlying connector. At this point, you will need to unscrew the screws that secure the panel to its seat: they are located under the removed panels and in the lower part of the door panel. This way, the door panel can be removed to insert the new one: this must be fixed with the previously unscrewed screws.

Posted on 27 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Dismantle the Internal Door Handle on a Renault Kadjar
How to Dismantle the Internal Door Handle on a Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) How do you dismantle the internal door handle on the driver’s side of a Renault Kadjar? Let’s see how to proceed: disconnect the battery terminals lo…
How to Remove the Front Door Panel on a Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) Before you can begin, open the door of your Renault Kadjar. Start by unclipping and removing the cover near the wing mirror. Then, unclip the window …
Removing the Door Panel of the Renault Kadjar
Removing the Door Panel of the Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) Today, we will go through the instructions that will allow you to remove and replace the rear door panel of the Renault Kadjar. First, open the vehic…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos