Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the cabin fan motor of the Renault Kangoo 2?

Model: Renault Kangoo MK 2, FC, FW - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Blower motor

See other generations:
Video tutorial

Facing the work described in the subject, undoubtedly requires time and a minimum of manual skills, as the position of the component in question, inside the cockpit, is quite uncomfortable. As visible in our video, it is necessary to dismantle almost entirely the dashboard, in fact, you must start by removing the glove compartment of the aforementioned dashboard, then remove all the perimeter screws of the latter, the panels under the steering wheel and at the end of all these operational steps, we reach the fan located between the central tunnel and, precisely, the dashboard.

All that remains is to unscrew the locking pins and disconnect the electrical cable connector that powers it.


Posted on 28 February 2025 by ScegliAuto


Related tutorials

Disassembly of the Renault Kangoo's cabin fan.
Disassembly of the Renault Kangoo's cabin fan.
Renault Kangoo (2007-2021 / MK 2, FC, FW) Below we will discover the main instructions on how to disassemble and replace the cabin fan of the Renault Kangoo. The cabin fan is located on the t…
Replacement of the cabin fan of the Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) Today we will discover the instructions that will allow us to disassemble and replace the cabin fan of the Renault Kangoo. First of all, we get on bo…
How do you replace the cabin fan resistor of the Renault Kangoo?
How do you replace the cabin fan resistor of the Renault Kangoo?
Renault Kangoo (1997-2008 / KC, MK 1, KW) It will be possible to replace the cabin fan resistor of the Renault Kangoo by opening the hood, so that you can access the top of the engine compart…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos