Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Placement of the fuse box of the Renault Megane 2

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Fuse box

If one of the components of the electrical system of the Renault Megane suddenly stops working, the reason may be the intervention of the fuse protection. To perform the check and replace the burnt element, we locate the box containing the fuses. Positioned near the driver's seat, we open the panel on the left where, at the bottom, relative to the steering column, we will see the plate where the fuses are housed on the left. To identify the fuse of interest, we consult the diagram found in the owner's manual provided with the car.

Posted on 9 March 2025 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box in the Renault Megane
Where is the fuse box in the Renault Megane
Renault Megane (2008-2015 / Megane 3, Megane III) Let's see the fuse diagram in the third series Renault Megane. This position is identical for all model types (sedan, coupé, convertible and station …
Where is the fuse box of the Renault Megane 2 located?
Where is the fuse box of the Renault Megane 2 located?
Renault Megane (2002-2010 / Megane 2) The Renault Megane model mk2 contains two fuse boxes inside. The first fuse box is installed inside the front hood. The second fuse box is installed …
Location and layout of the internal fuse box of the Renault Megane
Location and layout of the internal fuse box of the Renault Megane
Renault Megane (2002-2010 / Megane 2) Let's see in this guide the positioning and the diagram of the fuses of the Renault Megane, following the instructions below. First of all we get on …

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos