Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the rear taillight of the Renault Master MK4

Model: Renault Master MK 3 - Years 2010-2023
Part: Tail light

If we need to replace the rear light of the Renault Master, let's see how to proceed. We open the rear door, on the pillar corresponding to the light to be changed, we remove the two rubber protections, unscrew the two bolts that hold the light, we grip the light and pull towards us to overcome the resistance of the pressure pins that hold it. After removing the light with a screwdriver, we unscrew the two screws that hold the plate where the bulbs are housed, separate the two parts, take the new light, mount it on the bulb plate and tighten the screws. We put the light back in its seat, screw the two bolts and put back the rubber protections.

Posted on 13 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulb of the Renault Master
How to replace the rear headlight bulb of the Renault Master
Renault Master (2010-2023 / MK 3) If you need to replace the rear headlight bulb of your Renault Master, but you don't know how to do it, then you just have to carefully read the foll…
How do you replace a light bulb in the Renault Master 4?
How do you replace a light bulb in the Renault Master 4?
Renault Master (2024-2026 / MK 4, XDD) In this video, we will learn how to independently replace a bulb in the Renault Master 4, specifying that the vehicle used in the aforementioned vide…
How to replace the rear light of the Renault Master
How to replace the rear light of the Renault Master
Renault Master (1997-2010 / MK 2) Today we will explain how to replace the rear light of the Renault Master model mk2. To carry out this operation independently, we need to use a 30mm…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos