Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Light Bulbs on a Renault Master MK3

Model: Renault Master MK 3 - Years 2010-2023
Part: Tail light bulb

In this video, we demonstrate how to replace a blown rear light bulb on the Renault Master for safety and to avoid penalties. Open the rear doors of the van and position yourself at the side of the light containing the bulb that needs replacing. You will find inspection holes in the inner trim through which you can access the two screws securing the light. Unscrew them and remove the light unit. Disconnect the connector and place the light on a work surface. Unscrew the three screws securing the bulb holder, replace the blown bulbs, reassemble the holder, reconnect the light, and secure it back in place with its screws.

Updated on 22 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the rear taillight of the Renault Master MK4
Replacement of the rear taillight of the Renault Master MK4
Renault Master (2010-2023 / MK 3) If we need to replace the rear light of the Renault Master, let's see how to proceed. We open the rear door, on the pillar corresponding to the light…
How to replace the rear headlight bulb of the Renault Master
How to replace the rear headlight bulb of the Renault Master
Renault Master (2010-2023 / MK 3) If you need to replace the rear headlight bulb of your Renault Master, but you don't know how to do it, then you just have to carefully read the foll…
Replacing the Headlight Bulb on the Renault Master
Replacing the Headlight Bulb on the Renault Master
Renault Master (2010-2023 / MK 3) Follow these steps to replace the dipped beam bulb in the front headlight of the Renault Master. Open the bonnet and position yourself at the headlig…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos