Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset all dashboard errors on a Renault Clio 5

Model: Renault Clio Clio 5, Clio V - Years 2019-2026
Part: Dashboard

If the dashboard of your car is full of warning lights and you want to try to reset them, here is a simple trick. Turn off the car, close all the doors and wait a couple of minutes. Then turn on the ignition without starting the engine, that is, press Start without pressing the pedal. Now press and hold the onboard computer button, which is usually located on the right lever, until the lights start flashing or disappear. If the problem persists, disconnect the battery for 10-15 minutes and then reconnect it. If after all this the lights remain on, there may be a real fault and you need a diagnosis at the workshop. Contact your trusted workshop if the problem persists or if you don't feel comfortable operating in do-it-yourself mode.

Posted on 24 March 2025 by ScegliAuto

Video tutorial

Related tutorials

Where is the EOBD port located on the Renault Clio II?
Where is the EOBD port located on the Renault Clio II?
Renault Clio (1998-2005 / Clio 2, MK 2) In this video, we see where the EOBD (European On Board Diagnostic) port is located on the Renault Clio II. This diagnostic port is derived from the …
Layout and positioning of the internal fuses of the Renault Clio.
Layout and positioning of the internal fuses of the Renault Clio.
Renault Clio (1998-2005 / Clio 2, MK 2) In this guide we will see the layout and positioning of the internal fuses of the Renault Clio, in simple steps. First, we open the front door on the…
How do you reset the AdBlue warning light on the Renault Clio?
How do you reset the AdBlue warning light on the Renault Clio?
Renault Clio (2019-2026 / Clio 5, Clio V) To completely remove the AdBlue warning light from the instrument panel of the Renault Clio, you will first need to top up with the necessary amount …

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos