Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove and Replace the Fuel Filter on Renault Megane

Model: Renault Laguna MK 3, Laguna III, MK III, X91, Laguna 3 - Years 2007-2015
Part: Diesel fuel filter

Follow these steps to remove and replace the fuel filter on Renault Megane: Lift the car on a column lift or suitable jack and remove the front wheel (using a screwdriver, remove the right wheel arch liner). Use a spanner or socket to unscrew the bolts of the plate that supports the fuel filter, then disconnect the various circulation pipes and the electrical sensor from it. Fit the new fuel filter and tighten everything with the spanner. Finally, refit the plastic wheel arch liner with rivets; test the correct operation of the previously fitted part.

Updated on 3 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Laguna (2007-2015 / MK 3, Laguna III, MK III, X91, Laguna 3) Replacing the diesel filter on a Renault Laguna? Here’s how to do it. Lift the car on a column lift, remove the wheel, and take off the protection pa…
Renault Laguna (2001-2007 / MK 2, Laguna 2, X74) How do you replace the pollen filter on a Renault Laguna? This guide shows you how to remove it: lift the bonnet, then unscrew the securing screws of…
Renault Laguna (2007-2015 / MK 3, Laguna III, MK III, X91, Laguna 3) In today’s video tutorial, we will see how to remove and replace the cabin pollen filter of a third-generation Renault Laguna. Get inside the car and…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos