Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you disassemble the dashboard of the Renault Megane 2?

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Dashboard

The disassembly of the dashboard of the Renault Megane 2, if helped by a video guide as in this case, will be less difficult than you might think. The protagonist of the video, now mentioned, shows us how to perform the work, focusing specifically on the instrumentation of the aforementioned dashboard: You must grasp the plastic cover of the instrument panel and pull upwards, detaching it, then remove the perimeter screws and finally extract everything from the dashboard, but with care because there is one last thing to do, namely disconnect the rear electrical power connectors.

Posted on 25 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to remove the cabin filter on the Renault Megane
How to remove the cabin filter on the Renault Megane
Renault Megane (2002-2010 / Megane 2) How do you remove the cabin air filter on a Renault Megane? Let's see how to proceed with the removal. With a plastic lever we detach the lock of the…
Removing the air vents on Renault Megane
Removing the air vents on Renault Megane
Renault Megane (2015-2023 / Megane IV, Megane 4) Replacing the air vents on Renault Megane, let's see how it is disassembled. We leverage the upper and lower parts with the levers (as in the video),…
How to remove the mirror from the mirror of a Renault Megane
Renault Megane (1995-2003 / Megane 1) Let's see how to remove the mirror mounted above the exterior mirror of a Renault Megane. With a plastic lever, we go to pry between the perimeter of…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos