Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the diesel filter on a Renault Megane IV

Model: Renault Megane Megane IV, Megane 4 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Diesel fuel filter

See other generations:
Video tutorial

In this video, we will see how to change the diesel filter on a Renault Megane IV: in addition to the filter described in the video, we will need a 32 mm ratchet wrench, a 10 mm wrench, and pliers. We will need to raise the front part of the car a bit, in order to get underneath: in the middle part of the car we will find our filter: we will need a basin, because we will lose some liquid.

We remove the protective cover, held in place by 10 mm screws and washers that we will remove with pliers, then we turn the side tap and let it drain; when it is empty we can remove it, and replace it with the new one; we reassemble the plastic cover, and then we can lower the car back to the ground.


Posted on 18 August 2025 by ScegliAuto


Related tutorials

When to Change the Diesel Filter on a Renault Megane
Renault Megane (2015-2023 / Megane IV, Megane 4) Replacing the diesel filter on a Renault Megane? Here’s how to do it. Lift the car on a column lift, and remove the protection panel. Locate the dies…
How to Replace the Diesel Filter on a Renault Megane?
How to Replace the Diesel Filter on a Renault Megane?
Renault Megane (2002-2010 / Megane 2) To replace the diesel filter on a Renault Megane, lift the car and place a fluid collection tray underneath. Next, disconnect the hoses from the dies…
How to Locate and Replace the Diesel Filter on the Renault Megane Mk4
How to Locate and Replace the Diesel Filter on the Renault Megane Mk4
Renault Megane (2015-2023 / Megane IV, Megane 4) This guide shows how to locate and replace the diesel filter on the Renault Megane Mk4. The filter is located at the front of the left rear wheel. To…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos