Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to align the front camera after replacing the windshield in a 2020 Renault Captur

Model: Renault Captur MK 2 - Years 2019-2026
Part: Windshield

So, after changing the windshield of your car, you need to realign the front camera to properly operate the ADAS systems, such as automatic braking and lane assistance. You need an official Renault diagnostic tool or a compatible one, such as Bosch or Autel. The car must be placed on a flat surface, with the wheels straight. A calibration panel is placed in front of the vehicle at a precise distance (depending on the software). Then, through the tool, the guided procedure is started, which adjusts the camera and stores the new parameters. After calibration, a road test is done to verify that everything is working properly. If you don't have the right equipment, it's better to rely on a specialized workshop!

Posted on 30 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the windshield wiper brush of the Renault Captur?
How do you replace the windshield wiper brush of the Renault Captur?
Renault Captur (2013-2019 / MK 1) The method for replacing the windshield wiper blade of the Renault Captur is not much different from the majority of cars on the road, in fact, this …
Rear camera assembly instructions on Renault Captur 2020
Rear camera assembly instructions on Renault Captur 2020
Renault Captur (2019-2026 / MK 2) In today's video tutorial we will see the instructions that will allow us to install the rear-view camera on a Renault Captur second series, from 202…
How to replace the front wipers of the Renault Captur
How to replace the front wipers of the Renault Captur
Renault Captur (2013-2019 / MK 1) Replacing the wiper blades of the Renault Captur is a very simple and quick operation to perform independently, thanks also to our short instructiona…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos