Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you set the clock in the Renault Master?

Model: Renault Master MK 3 - Years 2010-2023
Part: Clock

When you need to set parameters, adjust certain sensors, reset warning lights and more, you can often do so easily through electronic diagnostic tools, which need to be connected to the OBD port. In the case of the Renault Master 3, this port is located to the left of the steering column, along with the fuse box. All of these are covered by a plastic panel that needs to be removed in order to connect the tool to the vehicle's ECU via a cable. By configuring the vehicle model, you can access the Settings and make the necessary adjustments.

Posted on 9 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you set the clock on the Renault Master?
How do you set the clock on the Renault Master?
Renault Master (1997-2010 / MK 2) The clock adjustment on the Renault Master instrument panel can be done by turning on the panel, inserting the ignition key into the corresponding sl…
How do you set the clock on the Renault Master?
How do you set the clock on the Renault Master?
Renault Master (2010-2023 / MK 3) The clock adjustment that is present on the instrument panel of the Renault Master can be done by turning on the panel, after inserting the ignition …
How do you set the clock on the Renault Master?
How do you set the clock on the Renault Master?
Renault Master (2010-2023 / MK 3) It will be possible to adjust the clock of the Renault Master by turning on the instrument panel, inserting the ignition key into the corresponding s…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos