Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Renault Clio 3?

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Service warning light

It will be possible to completely remove the Service warning light from the Renault Clio 3 instrument panel by turning on the instrument panel and then holding down the button located at the end of the lever to the right of the steering wheel. By holding down this button for a few seconds, the Service warning light will start flashing and the maintenance interval will be reset. Once this has been reset, the Service warning light will disappear completely and you can release the button on the right lever. To verify that the reset was successful, you will need to reactivate the instrument panel.

Posted on 8 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Renault Clio
How to Reset the "Service" Light on a Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Before you begin, sit in the driver's seat of your Renault Clio. Start by activating the instrument panel. Next, select the "Service Interval" option…
How to Reset the "Service" Light on a Renault Clio
How to Reset the "Service" Light on a Renault Clio
Renault Clio (2019-2026 / Clio V, Clio 5) Good morning, today’s goal is to reset the "Service" light on your Renault Clio. Turn on the instrument panel by pressing the power button. Next, usi…
How to Reset the Service Light on a Renault Clio 3
How to Reset the Service Light on a Renault Clio 3
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) When the service light illuminates on the instrument cluster of your Renault Clio Mk3 (2005-2013) despite having already completed the service, you m…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos