Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front bumper on the Renault Laguna?

Model: Renault Laguna MK 2, X74, Laguna 2 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Front bumper

See other generations:
Video tutorial

In this tutorial we can see how to remove the front bumper on the Renault Laguna, an extremely simple and quick operation. First, we open the hood, then we remove the upper grille and continue by releasing the inner covers of both wheel arches.

We then unscrew the screws that have just been released, continue by unscrewing the screws located on the lower side of the bumper and finish with the upper screws. At this point, all that's left to do is to grab the bumper from one of the two ends, detach it from the frame, and install the replacement if necessary following the reverse procedure.


Posted on 15 November 2025 by ScegliAuto


Related tutorials

How to disassemble the front bumper on the Renault Laguna?
How to disassemble the front bumper on the Renault Laguna?
Renault Laguna (2001-2007 / MK 2, X74, Laguna 2) .. In this tutorial we can see how to remove the front bumper on the Renault Laguna, an extremely simple and quick operation. First.. …
How to Remove and Replace the Front Headlights of the Renault Laguna
How to Remove and Replace the Front Headlights of the Renault Laguna
Renault Laguna (2007-2015 / MK III, X91, Laguna III, MK 3, Laguna 3) In this guide, we will discover the instructions on how to remove and replace the front headlights of the Renault Laguna. First, open the vehicle's b…
How to Remove the Front Headlamp of the Renault Laguna
How to Remove the Front Headlamp of the Renault Laguna
Renault Laguna (2001-2007 / MK 2, X74, Laguna 2) To remove the front headlamp of the Renault Laguna, open the bonnet to access the screws securing the front bumper. Loosen these screws to proceed wi…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos