Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front bumper on the Renault Laguna?

Model: Renault Laguna MK 2, Laguna 2, X74 - Years 2001-2007
Part: Front bumper

In this tutorial we can see how to remove the front bumper on the Renault Laguna, an extremely simple and quick operation. First of all, go in front of one of the two wheel arches, then locate the bolt between the bumper and the fender and unscrew it using a 10mm socket wrench. Then unscrew the two lower screws with a Torx T20 key, repeat the operation on the opposite side and open the hood. At this point, all that remains is to remove the plastic clips located on the upper side of the grille, grab the bumper from one of the two ends and separate it from the chassis.

Posted on 17 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to remove the front bumper on the Renault Laguna?
How to remove the front bumper on the Renault Laguna?
Renault Laguna (2001-2007 / MK 2, Laguna 2, X74) In this tutorial we can see how to remove the front bumper on the Renault Laguna, an extremely simple and quick operation. First, we open the hood, t…
How to Remove and Replace the Front Headlights of the Renault Laguna
How to Remove and Replace the Front Headlights of the Renault Laguna
Renault Laguna (2007-2015 / MK 3, Laguna III, MK III, X91, Laguna 3) In this guide, we will discover the instructions on how to remove and replace the front headlights of the Renault Laguna. First, open the vehicle's b…
How to Remove the Front Headlamp of the Renault Laguna
How to Remove the Front Headlamp of the Renault Laguna
Renault Laguna (2001-2007 / MK 2, Laguna 2, X74) To remove the front headlamp of the Renault Laguna, open the bonnet to access the screws securing the front bumper. Loosen these screws to proceed wi…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos