Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the car radio in a Renault Captur?

Model: Renault Captur MK 1 - Years 2013-2019
Part: Car stereo

It will be possible to replace the car radio of the Renault Captur by using a tool to pry off the trim panel located in the central part of the dashboard: once the panel has been removed, you can proceed to loosen the underlying mounting screws that need to be loosened in order to extract the component from its housing. Once the device has been extracted, you can then disconnect its connectors at the back and connect the new replacement part to them: this can now be secured with screws, and then everything can be covered with the panel.

Posted on 1 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to remove the car radio of a Renault Captur?
How to remove the car radio of a Renault Captur?
Renault Captur (2013-2019 / MK 1) Good morning, today's guide aims to dismantle the car radio of our Renault Captur. Let's start by sitting in the driver's seat. Then, using a thin bu…
Removing the Original Radio from Renault Captur
Removing the Original Radio from Renault Captur
Renault Captur (2013-2019 / MK 1) This guide shows you how to remove the original radio from a first-generation Renault Captur by following these simple steps. First, get inside the v…
How to replace the car radio in the Renault Captur?
How to replace the car radio in the Renault Captur?
Renault Captur (2013-2019 / MK 1) In this tutorial we can see how to replace the car radio in the Renault Captur, an extremely simple and fast operation. First of all, make sure that …

    Frequently Asked Questions

    • Captur 2019-2026 - What to do when the touch screen on Renault Captur does not work? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos