Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the gear knob of the Renault Megane 3

Model: Renault Megane Megane 3, Megane III - Years 2008-2015
Part: Shift knob

The replacement of the gear knob located inside the cabin of your Renault Megane third series is a very simple task that anyone can do. In the following guide addressed to you, you will find a description of the few steps you need to take to complete the operation in question. First of all, get into the car and make sure it is turned off, then grasp the gear knob and pull it forcefully upwards until it comes off. Finally, proceed to install a new knob, ensuring that it is perfectly compatible with your Renault Megane Mk3.

Posted on 1 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the gear knob of the Renault Megane.
How to replace the gear knob of the Renault Megane.
Renault Megane (1995-2003 / Megane 1) The disassembly and replacement of the gear knob of the Renault Megane is actually a very simple operation. First, we get into the car and start pull…
How to replace the gear knob of the Renault Megane
How to replace the gear knob of the Renault Megane
Renault Megane (2002-2010 / Megane 2) Today's main instructions will show us the process of disassembling and replacing the gear knob of the Renault Megane. First, we get on board the car…
Replacement of the automatic gear knob of the Renault Megane
Replacement of the automatic gear knob of the Renault Megane
Renault Megane (2015-2023 / Megane IV, Megane 4) In this short guide, we will see the instructions that will allow us to disassemble and replace the knob of the automatic gear lever of the Renault M…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos