Do it yourself
Frequently asked questions about cars and motorcycles

How to activate the traction control system of the Renault Clio IV

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Onboard computer

To activate the traction control mode on a Renault Clio model four produced from 2012 to 2019, we need to turn on the instrument panel and press the menu button to access the various options. Among the various options, select the traction control option. By holding down the OK button for a few seconds, we will activate the mode. To deactivate it, simply perform the same procedure and hold down the same button. After activating the control system, it is not necessary to restart the instrument panel, and we can go directly onto the road. If the system does not work correctly, it is necessary to check if the software of the control unit has been properly updated.

Posted on 14 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In order to deactivate the traction control of the Renault Clio, you need to connect a diagnostic tool to the OBD port of the vehicle. Once the conne…
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) To deactivate the traction control on the Renault Clio, insert the ignition key into the ignition switch and turn it to power on the instrument clust…
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Today's guide will show us how to disable the active traction control light on the Renault Clio, as well as the Captur, following the instructions be…

    Frequently Asked Questions

    • Clio 2012-2019 - How to fix bluetooth connection problems on Renault Clio? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos