Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire warning light in the Renault Scenic?

Model: Renault Scenic Scenic 3, Scenic III, MK III, MK 3 - Years 2009-2015
Part:

In this tutorial, we can see how to reset the tire warning light on the Renault Scenic, an extremely simple and quick operation that should be done only once the correct pressure of each tire has been restored following the instructions in the manual. First, let's go inside the cabin, then insert the key and turn on the instrument panel. Next, scroll through the various information on the display using the directional arrows at the end of the right lever, reach the "Tyre pressures" option, and perform the reset by holding the up arrow for the necessary time.

Posted on 15 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure warning light on the Renault Scenic?
How do you reset the tire pressure warning light on the Renault Scenic?
Renault Scenic (2016-2022 / MK 4, MK IV, Scenic IV, Scenic 4) In order to reset the tire pressure warning light on the Renault Scenic, first you need to inflate the car's tires, bringing them back to the correct…
How do you reset the tire pressure warning light on the Renault Scenic?
How do you reset the tire pressure warning light on the Renault Scenic?
Renault Scenic (2009-2015 / Scenic 3, Scenic III, MK III, MK 3) To reset the tire pressure warning light on the Renault Scenic, you need to inflate the tires until they reach the recommended pressure value: this w…
How to reset the tire warning light on the Renault Grand Scenic?
How to reset the tire warning light on the Renault Grand Scenic?
Renault Scenic (2016-2022 / MK 4, MK IV, Scenic IV, Scenic 4) In this tutorial, we can see how to reset the tire warning light in the Renault Grand Scenic, an extremely simple and quick operation, to be performe…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos