Do it yourself
Frequently asked questions about cars and motorcycles

Location and diagram of the fuse box of the Renault Megane 3

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Fuse box

Let's see what the positions of the fuse boxes are in the Renault Megane II: as is common in Renault vehicles, some accessories are protected by fuses located in the box that is found in the engine compartment, in front of the driver (left-hand drive). However, due to their limited accessibility, it is advisable to have the fuses replaced only by specialized workshops. The cabin fuse box is located at the bottom of the dashboard, on the left side of the steering wheel, in a small drawer with a handle, for left-hand drives. As for right-hand drives, the placement remains the same, but it is located inside the glove compartment.

Posted on 23 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Megane (2008-2015 / Megane III, Megane 3) Let’s look at the fuse diagram for the third series Renault Megane. This location is the same for all model types (saloon, coupe, convertible, and es…
Renault Megane (2002-2010 / Megane 2) In this video tutorial, you will learn the location and diagram of the fuse boxes of the Renault Megane Mk2, following the instructions below. First,…
Renault Megane (2015-2023 / Megane 4, Megane IV) In this video, you can see the location of the fuse box and its diagram for the Renault Megane 4, to consult if you need to check the fuse of a malfu…

Other guides you may be interested in

    Frequently Asked Questions

    • Megane 2008-2015 - Where is the Renault Megane air conditioning fuse located? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos