Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Warning Light on a Renault Clio III

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Service warning light

In this video, see how to reset the service light on a Renault Clio III: after ensuring that all doors, the rear boot, and the front bonnet are securely closed, insert the remote key into the ignition slot. Without pressing any pedals, press and hold the ignition button for about ten seconds. Wait for the maintenance interval light to turn off. Press one of the two buttons on the wiper stalk to scroll through the on-board menu until the remaining kilometres to the next service are displayed. Hold one of the two buttons on the wiper stalk for about two seconds until the new maintenance interval is displayed; release and switch off the ignition. If your vehicle has a traditional key instead of a card, the procedure changes only in the first step, where instead of inserting the card into the slot, you insert the key into the lock and switch on the ignition.

Posted on 15 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil light on the Renault Clio 3
How to reset the oil light on the Renault Clio 3
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) The oil level indicator of your Renault Clio Mk3 indicates the need to change the oil and the filter. If the indicator continues to light up even aft…
How to Reset the Service Light on a Renault Clio MK III
How to Reset the Service Light on a Renault Clio MK III
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) To reset the service light on a Renault Clio MK III, first, get into the vehicle, close all four doors, and turn the key to position 1, powering on t…
How to Reset the Oil Warning Light on a Renault Clio
How to Reset the Oil Warning Light on a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this video tutorial, learn how to reset the engine oil warning light on a third-generation Renault Clio produced from 2005 to 2013. First, switch …

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos