Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Third Brake Light and Replace the Bulbs on a Renault Kangoo

Model: Renault Kangoo MK 1, KC, KW - Years 1997-2008
Part:

Below are the instructions for removing and replacing the third brake light and its bulbs on a Renault Kangoo. First, open the rear tailgate of the vehicle and begin unscrewing the two screws of the third brake light, then pull it out from the outside. Disconnect the electrical connector of the bulbs, as shown in the video. At this point, replace any faulty bulbs with new ones of the same fitting; then reassemble the third brake light, securing it with the rear screws, and finally check the correct operation of the lights!

Posted on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Third Brake Light Bulbs on the Renault Kangoo
Replacing the Third Brake Light Bulbs on the Renault Kangoo
Renault Kangoo (2007-2021 / FW, FC, MK 2) Let's go through the steps to remove and replace the bulbs of the third brake light on the Renault Kangoo. First, open the rear tailgate and start by…
How to change the third brake light bulb of a Renault Kangoo 2
How to change the third brake light bulb of a Renault Kangoo 2
Renault Kangoo (2007-2021 / FW, FC, MK 2) Through today's video, we are shown the procedure for changing the third brake light bulb of a Renault Kangoo 2. So first of all, we need to open the…
How to replace the third brake light on a Renault Kangoo
How to replace the third brake light on a Renault Kangoo
Renault Kangoo (2020-2026 / FFK, KFK, MK 3) In this video, we can see how to change the third brake light on a Renault Kangoo when needed: we open the door and see that there are two pins insid…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos