Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on Renault Clio 5

Model: Renault Clio Clio V, Clio 5 - Years 2019-2026
Part: Service warning light

In the following guide, you will find the description of the entire procedure you need to follow to manually reset the engine oil light on your Renault Clio fifth series. First, turn on the instrument panel if it is still off, then focus on the button panel located on the right side of the steering wheel and press the down arrow button several times until the display shows the oil change screen. At this point, hold down the "OK" button until the display stops flashing.

Posted on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil light on the Renault Clio 3
How to reset the oil light on the Renault Clio 3
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) The oil level indicator of your Renault Clio Mk3 indicates the need to change the oil and the filter. If the indicator continues to light up even aft…
Reset the Service Light (Oil Change) on the Renault Clio
Reset the Service Light (Oil Change) on the Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) This brief guide explains how to reset the service light for the routine maintenance oil change on the Renault Clio. First, get in the vehicle and tu…
How to Reset the Oil Warning Light on a Renault Clio
How to Reset the Oil Warning Light on a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this video tutorial, learn how to reset the engine oil warning light on a third-generation Renault Clio produced from 2005 to 2013. First, switch …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos