|
Do it yourself
| |||
| ||||
How to Change the Engine Oil and Filter in a Renault Espace
Model: Renault Espace
MK 4
- Years 2002-2014
To change the engine oil and filter on a Renault Espace IV, park the vehicle on a level surface and lift it. Place a tray under the engine and remove the oil filler cap located at the top. Access the sump and unscrew the drain plug to allow the used oil to drain out. When the flow has stopped, reinstall the plug. Locate the oil filter, remove it with the appropriate tool, and clean the mounting surface before installing the replacement. Apply a small amount of new oil to the filter seal and screw it on until properly tightened. Then, pour the new oil from the upper filler neck in the amount specified for the installed engine. After checking the level, start the engine for a few seconds and check for leaks around the filter or drain plug, finally performing a last check of the oil level.
Posted on 12 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Renault Espace
(2002-2014 /
MK 4)
Let's see how to change the oil on the Renault Espace IV 3.5 V6 240 HP: start the engine for a few minutes to warm up the oil. The filter is located …
Renault Espace
(2002-2014 /
MK 4)
In this new mini guide, we will explain the various steps you need to follow if you intend to replace the engine air filter of your fourth series Ren…
Renault Espace
(2015-2022 /
MK 5)
In this video we can see how to change the cabin filter of a Renault Espace MK5; the filter is located in the footwell of the front passenger, and it…
Other guides you may be interested in
|
Where is the Fuel Filter Located in a Volvo XC60?
In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.178
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |