Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Service warning light on the Renault Scenic?

Model: Renault Scenic Scenic 3, MK 3, MK III, Scenic III - Years 2009-2015
Part: Service warning light

The instrument cluster of the Renault Scenic must be turned on using the ignition button, without starting the engine. Once the cluster is activated, check that the Service warning light is displayed: now, navigate through the menu using the button located at the end of the lever on the right side of the steering wheel until you find the maintenance option. By holding down that button for a few seconds, you will confirm that the Service warning light has been successfully cleared along with the corresponding maintenance intervals.

Posted on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Renault Scenic?
How to Reset the "Service" Light on a Renault Scenic?
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) Before you can start, ensure that the service has been performed, then sit in the driver's seat of your Renault Scenic. Begin by activating the instr…
How to reset the Service light on a Renault Scenic?
How to reset the Service light on a Renault Scenic?
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) To reset the Service light on a Renault Scenic, press the ignition button without pressing any pedals, so that only the instrument cluster lights up …
How to Reset the "Service" Light on a Renault Scenic
How to Reset the "Service" Light on a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) Before starting, sit in the driver's seat of your Renault Scenic. Activate the engine by turning the key in the ignition. Next, select the "Service" …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos