|
Do it yourself
| |||
| ||||
How to Reset the Service Light on a Renault Captur 2025
Model: Renault Captur
MK 2
- Years 2019-2026
Let's see how to reset the service light on the Renault Captur: turn on the ignition and using the arrow buttons on the left side of the steering wheel, navigate through the dashboard menu. Look for the "oil change" option, and when you find it, press and hold the "OK" button (in the centre of the arrow pad) for about 3-5 seconds until the message starts to flash. Release the "OK" button and, using the arrows, move to the "maintenance" option. Again, press and hold the "OK" button for about 3-5 seconds until the message "Done" or "Reset completed" appears (as shown in the video). At this point, the service light is reset. Turn off and then turn on the ignition to verify. Note that the system is very sensitive to timing: if you press too briefly or too long, the reset will not initiate. Hold it until you see it flash (usually after exactly 3 seconds).
Posted on 19 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Renault Captur
(2019-2026 /
MK 2)
In this tutorial, you will learn how to reset the service light on a second-generation Renault Captur, produced from 2019 onwards. After changing the…
Renault Captur
(2019-2026 /
MK 2)
Through these instructions, you will see how to reset the service light for the regular maintenance oil change on a Renault Captur. First, get into t…
Renault Captur
(2019-2026 /
MK 2)
In this tutorial, you will see how to reset the service light on the Renault Captur. Before performing this simple operation, you must complete all m…
Other guides you may be interested in
|
How to Remove the Airbag from Citroen C3
To remove the airbag from a Citroen C3, follow these steps, which you can also see in the attached video. Check the warning light: before proceeding, ensure that the airbag warning light is off and that the horn functions correctly. Disconnect the battery: disconnect the battery to ensure safety during the operation. Locate the holes behind the steering wheel: find the two holes located behind the steering wheel. Insert a long screwdriver: insert a long screwdriver into the holes and press firmly to unlock the internal clips. Remove the airbag: at this point, you can remove the airbag from the steering wheel and disconnect the two internal connectors. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.650
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |