Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Shift Knob on a Renault Clio?

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Shift knob

See other generations:
Video tutorial

This guide provides instructions for removing and replacing the manual gear shift knob on the Renault Clio. First, get inside the cabin and start detaching the gear gaiter from the base by prying it off the sides; then detach the clip between the gaiter and the knob by pulling the knob upwards with force until it comes off the lever, as shown in the video.

At this point, install the gear gaiter and then insert the knob, securing both components onto the lever with a clip.


Posted on 23 July 2026 by ScegliAuto


Related tutorials

Replacing the Gear Knob on the Renault Clio 3
Replacing the Gear Knob on the Renault Clio 3
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) In this video, learn how to remove and replace the gear knob on the third series Renault Clio in simple and quick steps. First, get into the vehicle …
How to Change the Gear Knob on a Renault Clio?
How to Change the Gear Knob on a Renault Clio?
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) If you want to personalise your vehicle or refresh the interior, you can replace the gear knob and, if desired, the gaiter as well. First, sit in the…
How to Remove the Gear Knob of a Renault Clio
How to Remove the Gear Knob of a Renault Clio
Renault Clio (1998-2005 / MK 2, Clio 2) Before you begin, sit in the driver's seat of your Renault Clio. Start by prising off and lifting the lower section of the gear lever gaiter. Next, g…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos