Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on Renault Scenic?

Model: Renault Scenic Scenic IV, Scenic 4, MK IV, MK 4 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Service warning light

See other generations:
Video tutorial

You can completely clear the Service light from the instrument cluster of the Renault Scenic by turning the key to activate the instrument cluster and holding down the button on the right side of the steering wheel as shown in the images. The button must be held until the maintenance interval appears on the screen; at this point, you need to press the OK button for about 5 seconds until a message appears.

Now, hold the button down again for another 10 seconds or so until the light has completely disappeared. After the operation, you can turn off the ignition by removing the key.


Posted on 14 August 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Renault Scenic?
How to Reset the "Service" Light on a Renault Scenic?
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) Before starting, ensure that the service has been completed, then sit in the driver's seat of your Renault Scenic. Begin by activating the instrument…
How to Reset the "Service" Light on a Renault Scenic?
How to Reset the "Service" Light on a Renault Scenic?
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) Before you can start, ensure that the service has been performed, then sit in the driver's seat of your Renault Scenic. Begin by activating the instr…
How to Reset the "Service" Light on a Renault Scenic
How to Reset the "Service" Light on a Renault Scenic
Renault Scenic (2003-2009 / Scenic 2, MK 2) Before starting, sit in the driver's seat of your Renault Scenic. Activate the engine by turning the key in the ignition. Next, select the "Service" …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos