Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil Change Light Reset on a Renault Captur

Model: Renault Captur MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

See other generations:
Video tutorial

In today’s video, the entire step-by-step procedure for resetting the oil change light on a Renault Captur, first series model produced from 2013 to 2019, is shown. First, turn on the vehicle's ignition without starting the engine.

Then, using the buttons at the end of the right stalk, scroll through the various options on the information display until you reach the "service interval" option. Press and hold the top button on the stalk until the service interval appears on the screen as shown in the video.

After this, press and hold the top button again until the maintenance interval is reset as demonstrated in the video to complete the task.


Posted on 18 August 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Renault Captur
How to Reset the Service Light on a Renault Captur
Renault Captur (2013-2019 / MK 1) This video shows how to reset the maintenance and oil change light on the Renault Captur. It is recommended to perform this procedure only after chan…
How to Reset the Trip Meter on a Renault Captur
How to Reset the Trip Meter on a Renault Captur
Renault Captur (2019-2026 / MK 2) Before you begin, sit in the driver's seat of your Renault Captur. Start by repeatedly pressing the selection button on the right side of the steerin…
How to Reset the Service Light on the Renault Captur
How to Reset the Service Light on the Renault Captur
Renault Captur (2013-2019 / MK 1) To reset the service light on the Renault Clio 4 Captur, the first step is to insert the card, as shown in the video, into the designated slot of the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos