|
Do it yourself
| |||
| ||||
How to Replace the Switches (Lights, Horn, Indicators) on a Renault Twingo II
Model: Renault Twingo
Twingo 1
- Years:
1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Video tutorial
If the indicator stalk on your Renault Twingo II is not working, remove the upper cover of the steering wheel in the dashboard area, which is secured with metal clips. Under the cover, you will find two screws that need to be unscrewed to free the control unit, but it will still be electrically connected, so you will need to disconnect the electrical connectors. Then, extract the old switch and install the new one, which can be found on auto-doc.it with the EAN code 2021107285100 for the price of £36.49 + £9.95 for delivery. Refit the two screws, replace the upper cover, test the operation of the indicators, lights, and horn, and you are finished.
Posted on 29 September 2026 by ScegliAuto
Related tutorials
Renault Twingo
(2007-2014 /
Twingo 2)
This video shows where the horn is located on a Renault Twingo and how to proceed if you need to replace it, a very simple and quick operation. As sh…
Renault Twingo
(2007-2014 /
Twingo 2)
The Renault Twingo 2 has a single fuse box located between the steering column and the driver's door, in a small compartment covered by a plastic lid…
Renault Twingo
(2007-2014 /
Twingo 2)
Lift the bonnet and insert the support rod. Replacing the front headlight bulbs is very simple: for most of them, just remove the rear cover (inside …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Remove the Cabin Fan in the Nissan Qashqai?
The cabin fan in any vehicle, specifically the Nissan Qashqai this time, may fail for various reasons: blown fuse, shorted wire, but the most serious issue is a broken fan. This means you need to remove it and check it, and if necessary, replace it. In this vehicle, it is located in the footwell area, so you will need to remove the carpet covering of the centre tunnel, then carefully navigate through the various wires present, and finally, once located, disconnect the electrical wires supplying it and unscrew the fixing screws. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.028
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |