Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Interior Light Bulb on a Renault Clio

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Interior dome light bulb

See other generations:
Video tutorial

Learn how to replace the bulbs in the interior light of a Renault Clio. Use a screwdriver to pry between the cover of the interior light and the light itself (without breaking the side plastics). Remove the detached lens from the interior light, then take out the bulbs/LEDs and replace them with new ones (same size and voltage).

Refit the lens into the interior light (push it with your hands until the plastics are fully locked). Test the correct operation of the light before refitting the new part.

Finally, reassemble the interior light into its housing.


Updated on 13 March 2026 by ScegliAuto


Related tutorials

How to Replace the Interior Light Bulbs on the Renault Clio?
How to Replace the Interior Light Bulbs on the Renault Clio?
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In this tutorial, you will see how to replace the interior light bulbs on the Renault Clio, a very simple and quick operation. First, go inside the c…
How to Replace the Front Headlight Bulb on a Renault Clio
How to Replace the Front Headlight Bulb on a Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) The following instructions will allow you to remove and replace the front headlight bulb on a Renault Clio. First, open the engine bonnet of the vehi…
How to Replace the Front Headlamp Bulb on a Renault Clio 3
How to Replace the Front Headlamp Bulb on a Renault Clio 3
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) To replace the front headlamp bulb on your Renault Clio 3, open the bonnet to access the components in the engine bay. Locate the protective cover of…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos