|
Do it yourself
| |||
| ||||
What to check if the fuse in the Renault Clio IV blows and the car won't start
Model: Renault Clio
- Years:
2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Video tutorial
In this video, you will see the issue with a Renault Clio IV, where a fuse keeps blowing, preventing it from starting. The YouTuber disconnected, step by step: the injectors, the glow plugs (this is a 1.5 dCi), and the fuel pump, but the fuse still blew. The cause was a bundle of wires located near the starter motor, which was pinched and frayed. The wires were touching each other, causing a short circuit. The solution was to cut the two damaged wires, insert two new wires (without tying them too tightly, as they were originally), and reconnect everything. The car then started normally.
Posted on 20 November 2026 by ScegliAuto
Related tutorials
Renault Clio
(2012-2019 /
MK 4, Clio IV, Clio 4)
In the Renault Clio IV, there is a fuse box located inside the engine compartment, on the right side relative to the starter battery, and one inside …
Renault Clio
(2005-2013 /
Clio III, MK 3, Clio 3)
The radio fuse on a Renault Clio MK3 is located inside the fuse box in the cabin. Specifically, the box is behind the driver’s side glove compartment…
Renault Clio
(2012-2019 /
MK 4, Clio IV, Clio 4)
Today, I will explain how to operate the wipers on the Renault Clio MK4 produced from 2012 to 2019. To operate the wipers, turn on the vehicle's igni…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Frequently Asked QuestionsWhere is the battery located on the Aprilia Scarabeo 250ie scooter?
This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.037
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |