Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Renault
  4. :
  5. Megane
  6. : Removing the air knobs on Renault Megane

Renault Megane - Video tutorial

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Dashboard light
Operation: Removing the air knobs on Renault Megane

Are the light bulbs in the air conditioning knobs burned out? Let's see the disassembly of the knobs on Megane. We remove the plastic covering the dashboard (on the sides of the central dashboard) with a plastic lever. Disassembled the plastics we go to detach the plastic covering the stereo and the air knobs (we remove with lever), disconnect the power supply terminals at the bottom. We remove the stereo with the original keys supplied; let's take it out of the dashboard. We detach the ventilation knobs and replace the bulbs placed inside them. We assemble all the pieces.


Posted on 29 November 2023 by ScegliAuto



Removing the air vents on Renault Megane
Renault Megane (2015-2023 / Megane 4, Megane IV) Replacing the air vents on Renault Megane, let's see how it is disassembled. We leverage the upper and lower parts with the levers (as in the video),
How to replace the engine air filter of the Renault Megane 3
Renault Megane (2008-2015 / Megane III, Megane 3) If the engine of your Renault Megane Mk3 often overheats even at low speeds, it is very likely that it is time to replace the air filter. In this new
How to replace the air filter of the Renault Megane 4.
Renault Megane (2015-2023 / Megane 4, Megane IV) If the engine of your Renault Megane Mk4 overheats abnormally due to the air filter being too old, then you must replace it as soon as possible. Belo

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos