Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Clio
    4. : Replace the antenna of the Renault Clio

Renault Clio - Video tutorial

Model: Renault Clio Clio 1, MK 1 - Years 1990-1998
Part: Antenna
Operation: Replace the antenna of the Renault Clio

Replacing the damaged Renault Clio antenna? Let's see how it disassembles from above the car roof. With a screwdriver we pry between the ceiling light and the sky panel (without breaking the sky), take the ceiling light out of the panel and disconnect the power supply terminal. We unscrew the locking pin of the antenna support (placed between the sheet metal and the support). As soon as we have removed the old support, mount the new one on the car roof (screw the pin with the screwdriver until it is completely locked). We screw the antenna onto its support.


Posted on 9 December 2023 by ScegliAuto



Replace Renault Clio antenna
Renault Clio (1998-2005 / Clio 2, MK 2) Let's see the disassembly of the antenna base on a Renault Clio. We remove the plastic cover from under the protective roof panel: we peel off the pr
Removing the cable and base of the radio antenna on Renault Clio 4
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Open the boot lid and remove the inner canopy. By pressing the appropriate buttons next to the head restraint, you can make the rear seat backrests f
Disassembly of Medianav Renault Clio on-board computer
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In today's video tutorial we will see how to disassemble the Medianav on-board computer of a Renault Clio, but also of other Renault and Dacia models

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos