Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Timing Belt on a Renault Megane

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Timing belt

Dismantling and replacing the timing belt on a Renault Megane. Remove the front right wheel to access the belt. Lift the car on a column lift and remove the front wheel, using a screwdriver to detach the covering splash guard. Use a spanner to loosen the tensioner pulley and slide the belt off its seat. Unscrew the tensioner pulley securing bolt, and remove the water pump as shown in the video. Install the new water pump, the tensioner, and the belt, tightening everything with a socket wrench. Reattach the rivets with the splash guard and refit the wheel with the tyre onto the vehicle. Access the engine bay to remove the components as well.

Updated on 20 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Megane (2008-2015 / Megane III, Megane 3) .. How to replace the timing belt on a Renault Megane? Start by lifting the car on a column lift (if necessary,.. …
Renault Megane (2008-2015 / Megane III, Megane 3) Replacing the timing belt on a Renault Megane, here’s how to do it. Lift the car on a column lift, remove the front wheel and the right wheel arch li…
Renault Megane (2015-2023 / Megane 4, Megane IV) The timing belt on your Renault Megane with a 1.5 dCi engine should be replaced every 6 years or 160,000 miles. This varies significantly based on ve…

Other guides you may be interested in

    Frequently Asked Questions

    • Megane 2008-2015 - What is the cost of replacing the toothed belt on the Renault Megane? Read answer
    • Megane 2015-2023 - When should the timing belt be changed in a Renault Megane? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos