Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Clio rear light

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Tail light

Removing the rear light of a Renault Clio? Let's see the disassembly of the rear light. We open the hood of the luggage compartment, unscrew the plastic screw placed above the cloth covering. We detach the rear light from its housing once the screw has been removed. We replace the damaged bulbs with new ones (same size and voltage). We fix the new headlight above the car body, screw the clamping screw above the cloth compartment. We test the correct functioning of the bulbs mounted in the new headlight (we turn on the instrument panel and operate the light control levers.

Posted on 27 August 2020 by ScegliAuto

Video tutorial

Related tutorials

Removing the rear light and replacing the bulbs on the Renault Clio 3
Removing the rear light and replacing the bulbs on the Renault Clio 3
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Let's see in this guide how to remove the rear light and replace the bulbs on the Renault Clio third series, following these simple steps. First we o…
How to remove the rear light of a Renault Clio 4.
How to remove the rear light of a Renault Clio 4.
Renault Clio (2012-2019 / MK 4, Clio 4, Clio IV) To disassemble the rear light of a Renault Clio 4, some simple steps are required to be performed correctly to carry out the operation without damagi…
How to remove the rear light of the Renault Clio?
How to remove the rear light of the Renault Clio?
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Removing the rear light of the Renault Clio third series is very simple, let's see how to proceed in this tutorial. For this operation we only need a…

Other guides you may be interested in

Removing and Replacing a Front Headlamp of a Lancia Lybra

This video explains how to remove and replace the front headlamp and its bulbs on a Lancia Lybra. The car has a very simple and quick headlamp removal system. To start, lift the bonnet, reach into the engine bay, and (specifically at the rear of the headlamp) unclip the metal tab that secures the headlamp, then use a screwdriver to undo the few Torx screws. After removing the screws, unclip the headlamp and pull it out from the bumper, disconnect the power connectors, and replace any damaged bulbs or the entire unit. The reassembly phase is very straightforward: insert the headlamp into the bumper housing as shown in the video, secure the metal tab until the headlamp clicks into place (screw in the securing screws). Finally, test the correct operation of the lights.

Watch the video!


by ScegliAuto

More videos