Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Headlight Bulb on a Megane

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Headlight bulb

How to remove the headlight bulb on a Megane? Let's see how to access the front headlight and remove the bulb. Open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it with the prop. Unscrew the fastening screws of the plastic trim covering the front headlights. Remove the protection bar and all covering plastics. Locate the inspection cap of the headlight (located at the rear of the headlight) and remove it, pull out the bulb holder from the headlight and extract the damaged bulbs with the help of a screwdriver. Fit the new bulbs (always of the correct type and size) and insert the bulb holder into the headlight housing. Finally, refit the front headlight covers.

Updated on 27 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Headlight Bulb on a Renault Megane 4
Replacing the Front Headlight Bulb on a Renault Megane 4
Renault Megane (2015-2023 / Megane 4, Megane IV) In this tutorial, you will learn how to remove the front headlight bulb on a Renault Megane fourth series. The video demonstrates replacing an origin…
Replacing Front Headlamp Bulb on Renault Megane
Replacing Front Headlamp Bulb on Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) In this video tutorial, learn how to remove and replace the front headlamp bulb on a Renault Megane. First, open the bonnet and unscrew the screws of…
Replacing the Front Headlight Bulb on a Renault Megane
Replacing the Front Headlight Bulb on a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Let’s see how to replace the front headlight bulbs on a Renault Megane. Lift the bonnet by pulling the lever located at the bottom right of the dashb…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos