Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembling the Medianav Onboard Computer on a Renault Clio

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Onboard computer

See other generations:
Video tutorial

In today's tutorial video, we will see how to disassemble the Medianav onboard computer of a Renault Clio, as well as other Renault and Dacia models. First, get inside the vehicle and use plastic levers to remove the frame around the onboard computer; then unscrew the four screws located on the sides to extract the entire multimedia system.

At this point, disconnect the power cable and the antenna connector found at the back. Follow the reverse procedure for reassembly!


Updated on 28 March 2026 by ScegliAuto


Related tutorials

How to Restore and Update the Medianav Multimedia System in the Renault Clio
How to Restore and Update the Medianav Multimedia System in the Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Below are the main steps to restore and update the Medianav multimedia system in the Renault Clio, as well as in the Captur. First, get into the vehi…
How to Remove the MediaNav Display from the Renault Clio
How to Remove the MediaNav Display from the Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) The MediaNav digital system in the Renault Clio Mk4 allows you to utilise several important features. In case of malfunctions or device breakage, you…
How to Change the Language of the On-Board Computer on a Renault Clio
How to Change the Language of the On-Board Computer on a Renault Clio
Renault Clio (2019-2026 / Clio V, Clio 5) Good morning, today’s goal is to change the language of the on-board computer on your Renault Clio. Start by turning on the on-board computer by pres…

    Frequently Asked Questions

    • Clio 2012-2019 - How to fix bluetooth connection problems on Renault Clio? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos