Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Third Brake Light Bulbs on Clio

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part:

Are the number plate light bulbs blown? Let’s see how to remove the number plate light on a Clio. Pry between the number plate light and the rear bumper of the car. Once the light is removed, extract the bulb holder by hand, then disconnect the bulb from it. Fit the new/LED bulb (same size and voltage) into the bulb holder, then refit the light into the bumper plastic, pressing until it clicks into place. After fitting the light, turn on the lights to check the operation.

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Third Brake Light from a Renault Clio
How to Remove the Third Brake Light from a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this video, we will see how to remove the third brake light from a Renault Clio. First, open the boot lid and remove the plastic rivets with a scr…
How to Replace the Third Brake Light Bulb on the Renault Clio
How to Replace the Third Brake Light Bulb on the Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this short guide, you will see how to remove and replace the third brake light bulb on the Renault Clio. First, open the rear hatch of the boot an…
How to replace the third brake light on the Renault Clio 2
How to replace the third brake light on the Renault Clio 2
Renault Clio (1998-2005 / Clio 2, MK 2) In this video tutorial, we will see the steps that will allow us to disassemble and replace the entire third brake light on the Renault Clio second s…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos