Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Scenic
    4. : How to remove the dashboard of a Renault Scenic

Renault Scenic - Video tutorial

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Dashboard
Operation: How to remove the dashboard of a Renault Scenic

Before we can start, we will have to go and sit in the driver's seat of our Renault Scenic. So let's start by disengaging and removing the top cover, using a thin but strong tool and prying. After that, we will have to repeat this step for the bottom cover. By doing so, we will have discovered the screws that secure the dashboard to the dashboard. We then proceed by unscrewing and removing these screws. At this point, we will be able to extract the dashboard from its housing, and then disconnect the relative electrical connectors, and we will have successfully completed the disassembly.


Posted on 15 January 2024 by ScegliAuto



How to remove the glove compartment of a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) Before we can begin, we will have to sit in the front passenger seat of our Renault Scenic. Let's start by opening the door of the glove compartment
How to remove the dashboard of a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) Before starting, we will have to sit in the driver's seat of our Renault Scenic. So let's start by disengaging and removing the top cover of the dash
Renault Scenic dashboard replacement
Renault Scenic (2009-2015 / MK III, MK 3, Scenic III, Scenic 3) The following video shows us how it is possible to remove and replace the dashboard and windshield of the Renault Scenic. This procedure certainly re

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos