Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Scenic
    4. : How to replace the rear light bulbs on Grand Scenic

Renault Scenic - Video tutorial

Model: Renault Scenic MK III, MK 3, Scenic III, Scenic 3 - Years 2009-2015
Part: Tail light
Operation: How to replace the rear light bulbs on Grand Scenic

How to replace the rear light bulbs on Grand Scenic? Let's see how to disassemble the headlight and how to replace the bulbs. Using a screwdriver, unscrew the tightening screws placed on the side of the headlight (right or left), remove the screws in the rear part of the headlight (luggage compartment side). We detach the rear light from its housing once all the screws have been removed (we remove the power supply terminals) and replace the damaged bulbs with new ones (size and voltage equal). We mount the lighthouse with attached screws and reconnect the power supply terminals. We turn on the instrument panel and check the operation of the lights.


Posted on 16 January 2024 by ScegliAuto



Renault Grand Scenic 2 fog lamps replacement
Renault Scenic (2003-2009 / MK 2, Scenic 2) In this video we will see how to go to replace the fog light bulbs of the Renault Grand Scenic 2. First we will go to lift our car and with a screwdr
How to reset the service light of the Renault Scenic - Grand Scenic
Renault Scenic (2009-2015 / MK III, MK 3, Scenic III, Scenic 3) In this short and simple guide we will see the procedure that will allow us to reset the service light of the Renault Scenic and Grand Scenic. First
How to disassemble the rear light on a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) To remove the rear light on a Renault Scenic 2, here are the general steps to follow. Open the trunk door: this is essential to reach the fixing scre

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos