Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Modus
    4. : Interior fan fuse replacement on Renault Modus

Renault Modus - Video tutorial

Model: Renault Modus MK 1 - Years 2004-2013
Part: Interior blower
Operation: Interior fan fuse replacement on Renault Modus

To access the fuse box inside the passenger compartment, the one containing the 15 Ampere fuse that powers the fan, you must first remove the glove box. To do this, open and empty it, then unscrew all the surrounding screws that secure it in place. Remove the fuse box door in the lower corner and replace the F2 fuse, which is the one related to the air conditioning fan. Test the operation of the same and if it still does not have to be considered the hypothesis of replacing the resistor connected to it. Even if that doesn't work, it obviously means that the fan is the part that needs to be replaced.


Posted on 17 January 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Modus 2004-2013 - Why is the fan of the Renault Modus not working? Read Answer
    • Modus 2004-2013 - Location of interior fan Renault Modus? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos