Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the wheel of the Megane

Model: Renault Megane Megane 3, Megane III - Years 2008-2015
Part: Wheel

How to remove the wheel of the Renault Megane? Let's see the disassembly and assembly of the wheel, small wheel. We lift the trunk and take the wheel removal kit. We position the jack under the grip point of the car (under the most rigid part of the frame), lift the car a little and loosen the wheel pins. We unscrew the pins and pull the wheel off the hub. We mount the wheel on the hub with the respective pins and bring the car to the ground. Always remember to store the assembly kit with all its parts in the luggage compartment. We mount the plastic rim cover if we do not have the alloy rim.

Posted on 12 March 2021 by ScegliAuto

Video tutorial

Related tutorials

How to change the wheel on a Renault Megane
How to change the wheel on a Renault Megane
Renault Megane (2008-2015 / Megane 3, Megane III) Let's see how to change the wheel on a Renault Megane: we open the luggage compartment and take the wheel removal kit which includes: jack, jack leve…
How to replace a wheel on a Renault Megane.
How to replace a wheel on a Renault Megane.
Renault Megane (2008-2015 / Megane 3, Megane III) In this video, we see how to replace a wheel on the Renault Megane sedan. We open the rear door to access the spare wheel located under the rear trun…
How to remove the diesel filter on Renault Megane
How to remove the diesel filter on Renault Megane
Renault Megane (2002-2010 / Megane 2) Let's see how to remove the diesel filter present on Renault Megane: open the front hood and lift it, then, lift the car on a column bridge or specia…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos