Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil filter on a Renault Kangoo?

Model: Renault Kangoo KW, KC, MK 1 - Years 1997-2008
Part: Oil filter

Before starting, we will have to engage the first gear and activate the parking brake of our Renault Kangoo, and then raise the front of our car. So let's start by placing the special container under the oil pan, and then we will have to unscrew and remove the lower drain nut. By doing so, we will drain all the engine oil. When all the oil is out, we can go to unscrew and remove the oil filter, and we will have finished the disassembly. To fit the new oil filter, all we have to do is screw the new filter into its seat, and the replacement will be completed.

Posted on 16 March 2021 by ScegliAuto

Video tutorial

Related tutorials

Replacement engine oil and oil filter Renault Kangoo 1.2 Petrol
Replacement engine oil and oil filter Renault Kangoo 1.2 Petrol
Renault Kangoo (1997-2008 / KW, KC, MK 1) Let's see in this video tutorial how to replace the engine oil and oil filter on a Renault Kangoo 1.2 Petrol. First of all we lift the car and go to …
How to replace engine oil and oil filter on a Renaul Kangoo
How to replace engine oil and oil filter on a Renaul Kangoo
Renault Kangoo (1997-2008 / KW, KC, MK 1) Today in this short video we are going to see how to change the oil and the engine filter on our Renault Kangoo, it is not a very complex operation, …
How to replace the engine oil filter on a Renault Kangoo
How to replace the engine oil filter on a Renault Kangoo
Renault Kangoo (1997-2008 / KW, KC, MK 1) Before we can start, we will have to go and open the front hood of our Renault Kangoo. So let's start by pulling out and removing the engine oil dips…

Other guides you may be interested in

How to Remove the Steering Wheel from a Citroen C3

How do you remove the steering wheel from a Citroen C3? Before removing the steering wheel, disconnect the battery terminals located in the engine bay. Follow these steps to proceed with the removal: remove the inspection caps at the back of the steering wheel (if present), then, using a socket or screwdriver, undo the screws securing the steering wheel cover (where the airbag is located). Once the airbag (driver's side) is released, disconnect the power connectors and remove it. Using a socket, undo the large central bolt and take the steering wheel off its mount. For reassembly: connect the power connectors, then press the steering wheel with your hands (until it fits into its mount) and subsequently tighten the large bolt.

Watch the video!


by ScegliAuto

More videos