Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Pull on a Renault Mégane 3

Model: Renault Megane Megane III, Megane 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

See other generations:
Video tutorial

In this video tutorial, you will see how to remove the door pull on a Renault Mégane third series. First, open the front door and start by removing the door panel; then remove the triangular plastic cover behind the mirror by prying it with something thin, and unscrew all the torx screws on the panel.

Once the panel is removed, disconnect the handle cable and the electrical connector for the bulb; now remove the plastic cover located inside the panel to release the hinge. All that’s left is to unscrew the hinge bolt to remove the pull.


Updated on 9 April 2026 by ScegliAuto


Related tutorials

Removing the Door Pull of a Renault Megane
Removing the Door Pull of a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Today, we will see how to remove the door pull of a third-generation Renault Megane in this video tutorial. First, open the door and remove the door …
How to Remove the Outer Side Trim of the Renault Megane 3
How to Remove the Outer Side Trim of the Renault Megane 3
Renault Megane (2008-2015 / Megane III, Megane 3) Removing the outer side trim of the door on a Renault Megane 3 is a simple task, necessary if you need to repair the door from a dent. First, open th…
Replace the Door Pull on a Renault Megane
Replace the Door Pull on a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Need to replace the door pull? Here's how to dismantle it from inside the Megane door. Unscrew the securing screw located in the space of the interna…

    Frequently Asked Questions

    • Megane 2008-2015 - Where is the horn of a Renault Megane located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos