Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Filter on a Renault Scenic

Model: Renault Scenic MK III, Scenic III, Scenic 3, MK 3 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Cabin air filter

See other generations:
Video tutorial

To access the cabin air filter (or pollen filter), you need to work in the lower part of the central dashboard, accessing from the area under the glove compartment. For easier access, it is recommended to remove the glove compartment itself.

To do this, you need to: remove the horizontal plastic above it, unscrew the underlying T20 screws, remove the passenger airbag side switch (and disconnect it), and also unscrew these screws, finally unscrew the last (sixth) screw located at the bottom near the door.

Unclip the tube near the filter, remove the cover, and extract the filter.


Updated on 12 April 2026 by ScegliAuto


Related tutorials

How to replace the air filter of the Renault Scenic 4.
How to replace the air filter of the Renault Scenic 4.
Renault Scenic (2016-2022 / Scenic IV, Scenic 4, MK IV, MK 4) If you don't know how to replace the engine air filter of your Renault Scenic Mk4, don't worry because with the procedure described below, you will b…
Replacing the Cabin Air Filter on the Renault Scenic
Replacing the Cabin Air Filter on the Renault Scenic
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) Today's information will show you how to remove and replace the cabin air filter on the Renault Scenic in simple steps. First, open the driver's side…
How to Replace the Cabin Air Filter on the Renault Scenic 3
How to Replace the Cabin Air Filter on the Renault Scenic 3
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) Today, you will learn how to independently replace the cabin air filter on a Renault Scenic model 3. The steps to follow are very simple and quick. T…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos