Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Scenic
    4. : Replacing the front bumper of a Renault Scenic

Renault Scenic - Video tutorial

Model: Renault Scenic MK III, MK 3, Scenic III, Scenic 3 - Years 2009-2015
Part: Front bumper
Operation: Replacing the front bumper of a Renault Scenic

How do you remove the front bumper of our Scenic? We lift the tailgate of the Clio to access the tightening screws of the headlights and the bumper. Unscrew the fastening screws located on the side of the lights: remove them after disconnecting the power supply terminals. We unscrew the screws located in the lower part of the bumper, then remove the screws placed on the sides of the car's stone guards. Take the bumper and pull it away from the body (disconnect any power cables). We disconnect the electrical clamps from behind the bumper before removing it completely.


Posted on 4 February 2024 by ScegliAuto



How to remove the front bumper of the Renault Scenic.
Renault Scenic (2003-2009 / MK 2, Scenic 2) Through today's instructions, we will see how to disassemble and replace the front bumper of the Renault Scenic, in simple steps. First, we open the
How do you remove the front bumper of the Renault Scenic?
Renault Scenic (2009-2015 / MK III, MK 3, Scenic III, Scenic 3) To be able to remove the front bumper of the Renault Scenic you must first loosen the bolts located in the lower part of the bumper. Subsequently, it
How do you remove the front bumper of the Renault Scenic?
Renault Scenic (2016-2022 / Scenic IV, MK 4, MK IV, Scenic 4) The removal of the front bumper of the Renault Scenic is carried out by loosening all the screws that secure it to its housing. The screws in questio

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos