Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Scenic
    4. : How do you remove the front bumper of the Renault Scenic?

Renault Scenic - Video tutorial

Model: Renault Scenic MK III, MK 3, Scenic III, Scenic 3 - Years 2009-2015
Part: Front bumper
Operation: How do you remove the front bumper of the Renault Scenic?

To be able to remove the front bumper of the Renault Scenic you must first loosen the bolts located in the lower part of the bumper. Subsequently, it will be necessary to loosen all those that are inside the wheel arches. The other bolts to loosen will be at the front of the engine compartment, at the grille. In order to access it, it will therefore be necessary to open the hood. Once these screws have also been loosened, it will be possible to disconnect the connectors and completely remove the bumper. Once the old bumper has been removed, it can be replaced with a new spare part.


Posted on 8 March 2024 by ScegliAuto



How do you remove the front bumper of the Renault Scenic?
Renault Scenic (2016-2022 / Scenic IV, MK 4, MK IV, Scenic 4) The removal of the front bumper of the Renault Scenic is carried out by loosening all the screws that secure it to its housing. The screws in questio
How to remove the front bumper of the Renault Scenic.
Renault Scenic (2003-2009 / MK 2, Scenic 2) Through today's instructions, we will see how to disassemble and replace the front bumper of the Renault Scenic, in simple steps. First, we open the
How to remove the front bumper from Renault Scenic
Renault Scenic (2009-2015 / MK III, MK 3, Scenic III, Scenic 3) Today we will see, in this short and simple guide, the instructions on how to disassemble and replace the front bumper of the Renault Scenic. First o

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos