Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Radiator Fluid on a Renault Scenic

Model: Renault Scenic Scenic 2, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Checks and maintenance

See other generations:
Video tutorial

How do you replace the radiator fluid? Let’s see how to disassemble the parts to replace the coolant on a Scenic. Unscrew the tightening screw of the radiator hose at the bottom and drain the rusty fluid into a container.

Flush the cooling system with the appropriate fluid, performing this procedure until the pipes and radiator are completely clean. Once drained, reconnect the previously removed hoses, and screw in the tightening bolts of the radiator's metal clips in the engine bay. After replacement, test the operation of the Scenic.


Updated on 14 April 2026 by ScegliAuto


Related tutorials

Bleed Clutch Pump on Renault Scenic
Bleed Clutch Pump on Renault Scenic
Renault Scenic (2003-2009 / Scenic 2, MK 2) Let’s see how to bleed the clutch pump of a Renault Scenic, following these simple and important instructions. First, connect your hose to the bleed …
How to Remove the Heating Radiator from a Renault Megane
How to Remove the Heating Radiator from a Renault Megane
Renault Scenic (2003-2009 / Scenic 2, MK 2) Remove the plastic covering of the centre tunnel (located under the centre tunnel on the left). Unscrew the securing screws with a screwdriver, remov…
How to Resolve the Brake System Error Message on a Renault Scenic III
How to Resolve the Brake System Error Message on a Renault Scenic III
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) In this video, see how to resolve a brake system issue on the Renault Scenic III; the fault is indicated by the display. The problem arises from the …

    Frequently Asked Questions

    • Scenic 2016-2022 - Where is the Renault Scenic parking brake fuse located? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos