Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Heating Radiator from a Renault Megane

Model: Renault Scenic Scenic 2, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Heater core

See other generations:
Video tutorial

Remove the plastic covering of the centre tunnel (located under the centre tunnel on the left). Unscrew the securing screws with a screwdriver, remove the glove compartment and the surrounding plastics; take off the black plastic cover that conceals the heating radiator.

Once these steps are completed, move to the engine bay: remove the plastic engine cover and disconnect the two hoses (unscrew the securing clips if present) of the radiator that leads into the cabin, allowing the fluid to drain. Disconnect the radiator from the pipes in the cabin.

Work backwards through all the assembly steps.


Updated on 7 March 2026 by ScegliAuto


Related tutorials

How to Replace the Heating Fan Resistor on a Renault Scenic
How to Replace the Heating Fan Resistor on a Renault Scenic
Renault Scenic (2003-2009 / Scenic 2, MK 2) Today, we will explain how to replace the heating fan resistor on a Renault Scenic. To perform this operation, remove the lower part of the dashboard…
Replace the Radiator Fluid on a Renault Scenic
Replace the Radiator Fluid on a Renault Scenic
Renault Scenic (2003-2009 / Scenic 2, MK 2) How do you replace the radiator fluid? Let’s see how to disassemble the parts to replace the coolant on a Scenic. Unscrew the tightening screw of the…
How do you change the heating resistor in a Renault Scenic 2?
How do you change the heating resistor in a Renault Scenic 2?
Renault Scenic (2003-2009 / Scenic 2, MK 2) Changing the heating resistor of a Renault Scenic 2 is not that complicated, but it requires a bit of patience and some manual skill. The resistor is…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos